Γρήγορη Πρόσβαση

Επιλέξτε πρώτα την κατηγορία που σας ενδιαφέρει.

Τελευταίες Προσφορές

KX 5 VS KX 5 VS

290,00 €
145,00 €
Κερδίζετε: 145,00 €
 

Studio & Εξοπλισμός

Μήνυμα: Δεν δέχεστε cookies που είναι απαιτούμενα για την λειτουργία του Ιστοχώρου.Ελέγξτε τις ρυθμίσεις του Browser σας για την αποδοχή cookies.
ALPHA PLUS
Εμφάνιση Μεγάλης Εικόνας

AER Amps ALPHA PLUS

830,00 €

 

The Alpha plus is a complement to our Alpha, still as professional and versatile as the Alpha itself, but provided with increased power output.

With one channel but two independant input stages
(line and microphone/line), a dynamically controlled
50 Watts power-amplifier, 8“-twin-cone speaker-system, 3-band equalization and reverb, the Alpha plus
is applicable for the enhancement of a wide variety of
instruments just as well as vocals.

Although especially developed for acoustic instruments, the Alpha plus is suited excellently for all other (even electrical) instruments and the 48V-phantompower-supply of the XLR-input allows the operation of high-quality condenser-microphones.

The whole system ensures impressive dynamics plus a well-balanced distortion-free tone at all sound pressure levels, despite strikingly small sizes and little
weight.

 

Links

Manual(pdf)   YouTube   Front View   Rear View

 

Techniccal specifications

INPUTS Switchable line or microphone input Combo socket, XLR + jack ¼” (6.35 mm) line mode (jack only) Unbalanced high-impedance input for instrument pick-ups and line-level sources
Min. input voltage: 16 mV (–36 dBV)
Max. input voltage: 7 V (+17 dBV)
Input impedance: 2 MΩ || 300 pF Equivalent input noise, A-weighted: 2.1 μV (–114 dBV)
INPUT ΟΝΕ
mic mode (jack or XLR) XLR (balanced), stereo jack (balanced), or mono jack (unbalanced) microphone input
Min. input voltage: 2 mV (–54 dBV)
Max. input voltage: 1 V (0 dBV) Input impedance (balanced): 1.2 kΩ Input impedance (unbalanced): 2.7 kΩ Voice filter: –10 dB at 260 Hz (ref. to 10 kHz) Equivalent input noise, A-weighted: 0.7 μV (–123 dBV) Phantom power: 48 V (XLR only), R = 6.8 kΩ per terminal, total current max. 10 mA, short circuit protected.
INPUT TWO  Unbalanced high-impedance input for instrument pick-ups and line-level sources Mono jack, ¼” (6.35 mm)
Min. input voltage: 14 mV (–37 dBV)
Max. input voltage: 5 V (+14 dBV)
High / low switch: attenuator –10 dB Input impedance: 2.2 MΩ || 300 pF Equivalent input noise, A-weighted: 1.2 μV (–118 dBV) Optional phantom power (see notes): 9 V DC at “ring” terminal, max. 100 mA, short circuit protected return Return input for effect loop Mono jack, ¼” (6.35 mm)
Min. input voltage: 150 mV (–17 dBV)
Max. input voltage 5 V (+14 dBV)
Input impedance: 20 kΩ (5 kΩ if effect is switched off by footswitch.)
clip LED Headroom: min. 8 dB
OUTPUTS
Headphones output. When plugged in, the internal speaker is switched off. Stereo jack, ¼” (6.35 mm), L / R connected
Max. output power: 2 x 65 mW / 1000 Ω Input sensitivity for 2 x 50 mW / 1000 Ω : 19 mV (–35 dBV) at input 1, line mode Output impedance: 470 Ω (shared by L and R) Note: Suitable for headphones with stereo jack. Does not work with mono jacks.
line out Preamplifier output after master volume Mono jack, ¼” (6.35 mm) Output voltage: 1.4 V (+3 dBV) tuner Tuner output Mono jack, ¼” (6.35 mm) Output voltage: 450 mV (–7 dBV) DI-out Balanced XLR output before master, after tone controls, without effects Output voltage (differential): 190 mV (–15 dBV) send Send output for effect loop, before master, after tone controls Mono jack, ¼” (6.35 mm) Output voltage: 450 mV (–7 dBV)

Footswitch connector
footswitch Connector for a dual footswitch Stereo jack, ¼” (6.35 mm) tip = internal effect on/off ring = external effect on/off
sleeve = common (ground) Effect is OFF when the footswitch is ON.
Tone controls colour (input 2) –3 dB at 700 Hz, +10 dB at 8 kHz, switchable
bass ±8 dB at 100 Hz, shelf type
middle ±6 dB at 800 Hz
treble ±8 dB at 10 kHz, shelf type
Effects
Internal effect Built-in digital reverb External effect Parallel effect loop (effect blended with dry sound), see send and return.
Power

Power amp 40 W / 4 Ω at 1% THD, DMOS, monolithic I.C. Dynamic range, A-weighted: 92 dB Limiter Threshold 35 W / 4 Ω
Analog signal processing Subsonic filter, adaptive peak limiter Speaker system 8” (200 mm) twin cone full-range speaker, bass reflex enclosure Mains power Mains voltage (depending on model): 100, 120, 230, or 240 V~, 50–60 Hz.
Power consumption: max. 100 W Mains fuse Size: 5 x 20 mm For 230 and 240 V models: T 1 A L For 100 and 120 V models: T 2 A L
General
Cabinet 12 mm (0.47”) birch plywood Finish Waterbased acrylic, black spatter finish Dimensions 265 mm (10.4“) high
330 mm (13“) wide 235 mm (9.25“) deep Weight 7.2 kg (15.9 lbs) Definitions and conditions Input and output voltages are RMS values for a sine signal and 1 kHz unless stated otherwise. Tone controls in neutral position unless stated otherwise.
Min. input voltage: Required input voltage for 35 W / 4 Ω output, gain and master fully clockwise. Max. input voltage: Allowable input voltage that does not cause more than 1% total harmonic distortion, assuming suitable control settings. Output voltages refer to 50 mV (–26 dBV) at input 1, line mode, gain and master max. Equivalent input noise voltage: Noise voltage at speaker divided by voltage gain of amplifier for white noise, for the input under test. Gain and master fully clockwise, input
shorted, 20 Hz – 20 kHz, gain of unused inputs in zero position. Dynamic range of power amplifier: Ratio of output voltage at limiter threshold to A-weighted noise voltage with master in zero position. XLR connectors pin assignment: 1 = ground, 2 = positive (+), 3 = negative (–)
Options
Microphone input can be attenuated by 5 dB by an internal jumper, increasing the max. input voltage to 1.6 V (+4 dBV). 9 V phantom power for input 2 can be activated by an internal jumper. When activated, operation without phantom power is still possible by using a mono jack connector. 48 V phantom power for the XLR input can be deactivated by an internal jumper. (The jack input does not have 48 V.)
Warning: External equipment may be damaged by inappropriate use of phantom power.



Μάθετε περισσότερα για το προϊόν

Αναζήτηση Προϊόντων

Σύνθετη Αναζήτηση
 
Virtuemart Extensions


Καλάθι Αγορών

VirtueMart
Το Καλάθι σας είναι άδειο.

Κατασκευαστές

Μήνυμα: Δεν δέχεστε cookies που είναι απαιτούμενα για την λειτουργία του Ιστοχώρου.Ελέγξτε τις ρυθμίσεις του Browser σας για την αποδοχή cookies.
Created byPixelweb :: Creative Web Solutions